Velodyne SC-ICG Manual do Utilizador descarregar pdf (Página 9)

www.velodyne.com

SC-ICG User’s Manual - 5

7. Push the backside of the basket ange ush with the ceiling material, and tighten the four screws on the

basket engaging the clamps. The four screws should be hand tightened, or torqued to 4 inch pound.

8. Carefully push the aluminum grille into the groove on the grille basket. Ensure that the ange and the

grille edge are ush.

Figure 4. Push the SC-600 In-Ceiling Grille into the grille basket.

New Construction

1. Designate a suitable location for for the installation of the Velodyne in-ceiling subwoofer, during the

framing construction. Mark the driver location by stapling the mud ring template across the ceiling

beams centered at the designated location.

2. Using the cut-out template, cut a hole in the ceiling material to match the mud ring location.

3. Install the sheet rock. Do not remove the mud ring.

4. Follow the “Existing Construction Installation” steps 5-8 to complete the installation of the grille.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Velodyne SC-ICG Manual do Utilizador Página 9